LumiLine©-KuHu
LumiLine©-KuHu: “Illuminated short stroke keys:”

Input system ES46034.0001-a, customized version

Support plate:
- made of aluminum 380 x 202 x 5 mm/
14.96 x 7.95 x 0.2 inch - incl. break-throughs, millings and circular bevels
- incl. front side recess for front foil
- incl. back side recess for disk
- incl. 31 pieces EP-bolts M3x10mm
- surface: all-side anodized in black

Printed circuit board:
- from FR4 188 x 171 x 2,0 mm/
7.4 x 6.73 x 0.08 inch - assembled:
1x strip without ejection lever
2x17pin RM2,54
42x short stroke keys with full illumination
28x LEDs 20mA red for status display

Display protective disk:
- visible side "anti-reflective"
154,6 x 119,6 x 5 mm/
6.09 x 4.71 x 0.2 inch - incl. milled ledge for flush assembly
- glued onto the support plate from behind
Front foil:
- from polyester, fine-grain,
183 x 161 mm/ 7.2 x 6.34 inch
front side IP 65 - 7-colour printing on the back side
- key areas high-embossed
(pillow embossing) - LED-areas matt transparent (uncoloured)
- laminated into front enclosure recess
The whole system is 100% electr. tested

Input system FES193510002/ handling and control mode, customized


Printed board:
- made of zincor steel plate
590 x 254 x 1,5 mm/ 23.23 x 10 x 0.06 inch - incl. all break throughs
- incl. welded threaded bolts
Composition:
- made of polyethylene moulding foam
1mm / 0.04 inch, one side self-adhesive

Conductor plate:
- made of FR4, Cu 35/35
- plated-through
- solder resist on both sides
- milled
- mounted behind printed board
- Equipment main plate:
- 2 x Poti 10kOhm
- 24 x keys RF15H plane illiminated “white”
- 4 x LED 5 mm/ 0.2 inch “red”, conductoring
- 2 x connector for controller plate
- 1 x connector with display plate
- activation about TWI(I²C) BUS
- Mounting display platine:
- 1 x LCD display “EA DIP204-4 HNLED”
- 16 x keys RF15H plane illiminated “white”
- 1x connector to the main plate
- activation about TWI (I²C) BUS



Front foil:
- made of polyester, fine-grain,
590 x 254 mm/ 23.23 x 10 inch - 4-color printing on the back side
- display-area clearly printed for LCD-display
- keys- and LED-areas matt transparent
- back side self-adhesive
- uncoining
- cord set
- laminated onto the carrier plate
The whole system is 100% electr. tested